Communication modules GEOLINK series SEINE-5, P, PR, K, Z, etc.

Radio modems of the SEINE series
- The Seine radio modem is designed for transmitting and receiving digital information when working as part of distributed telemetry networks, control and automation of technological processes.

Models: SEINE-5

• The SEINE-5 model. Technical specifications.

GSM modems of the SEINE series
- GSM modem is designed to transmit telemetry information via GSM networks, allows you to deploy data collection systems quickly and at minimal cost. The modem is effective in urban telemetry systems.

Models: SEINE-GSM

• The SEINE model is GSM. Technical specifications.

Antennas of the Ah, Sirio series
- One of the most important nodes of radio transmitting devices is the antenna-feeder system, which largely determines the reliability of communication. As a rule, radio modems "Seine" are equipped with pin-shaped J-shaped antennas ASH-433 with a gain of 3 dB or five-element directional antennas AN5-433 with a gain of 8 dB. However, any other antenna devices designed to operate in the 433MHz region and having an input impedance of 50 ohms are acceptable. For example, SIRIO SA-703 antennas have proven themselves well as the base antennas of data collection points. For cases when the object is under threat of vandalism, the shortened AG-433 antennas with a very strong design may be useful.

Models: ASH-433

• Model ASH-433. Technical specifications.

Models: AN5-433

• Model AN5-433. Technical specifications.

Models: AG-433

• Model AG-433. Technical specifications.

Models: Sirio SA-703N

• The Sirio SA-703N model. Technical specifications.

SEINE Series Interface Converters
- Seine module+K is designed to convert signals of digital serial interfaces RS-232 and RS-485.
- Seine+K has the function of automatic control of the direction of data transmission. In addition, the module provides mechanical isolation of the RS-485 line with short circuit protection.
- The module is made in a plastic housing, mounted on a DIN rail, has one contact pad and a DB9 connector for quick connection of power cables and interface.

Models: Seine+K

• The Seine+K model. Technical specifications.

SEINE Series interface Repeaters
- Seine module+P is used to increase the load capacity of the RS-485 digital serial interface line. Installing one repeater allows you to add up to 256 additional modules to the line. In addition, the Seine +P provides galvanic isolation of the RS-485 line with short circuit protection.

Models: Seine+P

• The Seine model+P. Technical specifications.

Multichannel repeaters-splitters of the SEINE series interface
- SEINE module+PR is designed for galvanic isolation of network segments, regeneration of the transmitted signal, increasing the load capacity of the length of the RS-485 interface communication line.

Models: Seine+PR

• Model Seine + PR. Technical specifications.

Line protection modules of the SEINE series
- Seine protection module+Z is designed to protect long cable communication lines and automation equipment connected to it from voltage surges and overcurrents. It is recommended to use it with long communication lines laid outdoors or next to power cable channels. The module is not designed to protect antenna-feeder devices.

Models: Seine+Z

• Model Seine+Z. Technical specifications.

Brochure